Indoor blower motor re-installation/ replacement

Furnace blower motor:

The blower motor within your furnace equipment propels warm air through your home's vents. The PartsHnC platform has a huge assortment of Furnace Blower Motor Parts. That fulfills your needs.

Tools you need for replacement of blower motor

  • Screwdrivers to fit or open nuts-bolts
  • Nut drivers/ drills
  • Allen keys/ wrench/ Hex key
  • Blower Wheel Puller
  • Adjustable wrench/ spanner/ crescent
  • Penetrating oil/ fluid
  • Sand cloth
  • Rags
  • Operating condensing unit
  • New Replacement Blower Motor
  • Digital multimeter (DMM)
  • Clamp-on ammeter
  • Safety glasses
  • Smartphone

Safety instructions

  1. If you are doing blower motor parts installation for the first time, then do work with trained people
  2. Read AMCA publication 410- 96 and AMCA standard 99-0401-86 completely for any HVAC parts and accessories installation
  3. Switch off all plugs of the unit's connections
  4. Discharge all Capacitors safely
  5. Clean the area of the blower motor installation
  6. Unpack all material carefully
  7. Verify that newly opened equipment parts are in good operating conditions
  8. Note down all parts warranty and safety instructions
  9. Check all things properly before switching on the electrical supply
  10. After completing the installation, you must check the vibration, temperature, and whether all parts are working correctly

Methods/ steps to the blower motor parts installation of blower motor:                

  1. Turn off all the switches
  2. Wear safety hand gloves 
  3. Remove the furnace safety cover and clean it from inside
  4. Uncover your Blower Motor Parts from your furnace
  5. Find out all nuts, bolts, or screws and remove them with the help of the correct tool
  6. Before removing wires, take a photo of that wire’s structure. Photos help you at the time of re-plugging of wires.
  7. Before disconnecting wires, check all capacitors are discharged properly
  8. Unplug all wires from the furnace unit’s electrical components
  9. Use a grill to remove the fan guard from the condensing unit
  10.  Next, using the screwdriver, remove all screws of the fan blade
  11.  Remove fans from the motor using a hub-pulled tool
  12.  Clean the spray penetrating oil and rust on the shaft with the help of a sand cloth
  13.  A cleaned shaft helps to lose the blower wheel from the shaft
  14.  Do this work slowly and cleanly
  15.  Take a new blower motor. If you want to buy a blower motor from a top manufacturer, then you can visit Partshnc.com and read all specifications of the blower motor and motor parts.
  16.  Attach the fan to the blower motor
  17.  Mount the fan with a blower motor with screws. Properly fix the screws with the help of a set of screws.
  18.  Reinstall the condenser unit's condenser motor, fan blade, and fan guard grille. Carefully check all re-installed parts once properly.
  19.  Reconnect all the wires. And take photos for reference.
  20.  Recover all cover plates and cover clothes
  21.  Turn on the switches
  22.  Check sound, vibration, temperature, and other things properly
  23.  If all things are running properly, then your installation work is done
  24.  But if any things are improper, then turn off all switches
  25.  Tell your problem to any trained people or contact us at PartsHnC

How do you know if you have a bad blower motor?

If you spot any of the warning signals listed below, it is time to make repairs.

Weak or no air heating process

  • Clean the Furnace Parts once a month because dust and dirt are the main reasons for weak airflow
  • The capacitor must be in good condition
  • If your home is around the dust area or you didn’t replace your filters for the last 3 months, your unit gives you weak airflow
  • You always need to dry and fix your HVAC parts and accessories
  • A problem in the thermostat, battery, and fan also are the reasons for slow/ weak airflow or no airflow
  • If any of the above parts are working in poor condition, then repair them or replace them.

High heat

  • Dust and dirt damage your HVAC. 
  • HVAC blower motor parts show dangerous symptoms like extra heating or burning after a 10 to 15-year purchase. Turn off the electrical supply immediately, when the furnace smells burning. 

Extra noise

  • The compressor and other furnace parts create noise normally
  • The belt or bearing problem creates unfamiliar sounds. Check for any damage to the components. You can refer to Partshnc.com for the replacement of all furnace replacement components. 
  • Turn off all switches if there are any loud noises from your system. Because after a lot of noise, sometimes the furnace sparks. 

High electricity bills

  • Clean regularly for the long life of your furnace components and accessories. Dust reduces performance. And you get high electricity bills.

Where can I buy these blower motors online?

PartsHnC is one of the best online furnace parts and accessories and other HVAC components selling platforms.

Do you want to buy HVAC parts and accessories for your old HVAC system? Then contact us at contact@partshnc.com, or call us at (866) 963-0907.