Johnson Controls P32AF-13 Differential Pressure Control 03-1.4" WC

SKU: P32AF-13 5-P32AF-13 Brand: Availability:
In Stock
(0)

$126.98 Price reduced from $146.03
Save $19.05
You can earn 1,000 Reward Points for registration!


Have a Question? 866-773-0907

Specifications:

Attribute Details
Operating Temperature -40° to 165°F
Weight 1.09lbs
Relay Type SPDT
Sensor Type Buna-N Diaphragm
Type Gas Liquid/Gas
Operating Pressure Range 0.03 to 1.4" WC

Description

The Johnson Controls P32AF-13 Differential Pressure Control is used to measure and control the differential pressure in HVAC equipments. It is safe to operate in different temperatures, ranging from - 40°F to 74°C, and therefore this device can be used in different conditions. The Buna-N diaphragm sensor and SPDT relay the P32AF-13 is equipped with enable it to give accurate pressure differential in both liquid and gaseous systems. It is available in 4” WC working pressure range to suit many common uses such as ventilation systems, clean rooms and air handling equipment. This differential pressure control is useful in optimizing the HVAC systems since it ensures the best balance of air pressure and protects against pressure related issues.

Dimensions:

  • Weight: 2 lbs
Manufacturer Name: Johnson Controls
Product Number: P32AF-13
OEM Part Number: P32AF-13
Product Description: Diffpressctrl .03-1.4"Wc
Weight:1.09lbs/494.42g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or contact@partshnc.com

  • How to install an expansion valve for refrigeration?

    Thermostatic expansion valves are an integral part of your refrigeration unit. They are responsible for ensuring the right dosage of refrigerant is entering the cooling coil to ensure maximum efficiency in the air conditioning of the system. 

     

    These special expansion valves come with a temperature sensor that is mounted at the end of the evaporator coil. They incorporate signals from this sensor to maintain the required temperature of the HVAC system. The thermostatic expansion valve works like a precision device that can regulate the measurements of the liquid refrigerant that flows into the evaporator of your system. This regulation in the flow of the refrigerant is essential to prevent the reverse flow of the refrigerant into the compressor of your system. 

     

    Through this mechanism, the thermostatic expansion valve successfully separates the high and low pressure sides of the refrigeration/air conditioning system. The liquid refrigerant enters the expansion valve because it is under high pressure, this pressure is reduced by the expansion valve when it reduces the amount of refrigerant entering the evaporator of the system.

    Thermostatic Expansion Valve Installation

     

    You must follow the following steps carefully to install the expansion valve successfully:

     

    1. All valve fittings and exterior parts of the system should be thoroughly cleaned before you begin the soldering or brazing process. This will prevent any debris from encroaching upon the refrigeration system. 
    2. You must wrap a wet cloth around the thermostatic expansion valve to protect the expansion valve from extra heat. This wet cloth will give the system a good ⅓” to ½” protection, ensuring that the soldering or brazing torch is aimed away from the expansion valve. 
    3. It is imperative to not use excessive solder or flux during the process as the excess might flow into the expansion valve and prevent its efficient operation. 
    4. The expansion valve usually comes with a sensing bulb which can control the thermostatic expansion valve. This bulb should be clamped to the suction line of the refrigerant so that it can monitor the temperature of the system. 
    5. The thermostatic expansion valve should be installed close to the air conditioning or heat pump.
    6. If your expansion valve uses an external pressure equalization ability, this equalizing pressure line should be connected with the suction line, right after the temperature sensing bulb that is installed with the thermostatic expansion valve. 
    7. The thermostatic expansion valve is only responsible for the flow of the refrigerant into the evaporator, it cannot control several other variables in the system like the temperature, head pressure, suction pressure, capacity and humidity in the system. Any attempt to use the expansion valve to regulate any of these other factors can cause compressor failure or an overall reduction on the performance of the system.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More